VHF/UHF Antenna System Design


M2 2M Beam

M2 Antenna Systems 2m Yagi

We have an interest in weak signal work on the 2m and 70cm bands. We currently have a vertical ground plane antenna installed at about 50 ft for accessing our local repeaters on these bands but the surrounding tree cover and lack of gain have prevented us from pursuing our interest in VHF/UHF contesting, Grid Square collecting, etc. on these bands. We designed our tower to accommodate long-boom Yagi’s on 2m and 70cm for these purposes and we have decided to install them as part of our project. I spoke with Jason at M2 Antenna Systems this evening and after some discussion about our goals and the tower and station equipment we have, we decided upon the following antennas and related equipment for VHF/UHF weak system work:

Both of these antennas have good gain and F/B ratios and very good patterns. Initially, we will drive the system with our Icom IC-9100 Transceiver. This rig provides 100W on 2M and 75W on 70cm barefoot. This should be enough power to have some fun on these bands initially. We plan to add an amplifier on 2m and 70cm in the future so we selected antennas capable of handing 1KW+ of power. We are also having M2 Antenna Systems put together a custom pre-amp and high-power switching system to mount at the top of the tower which will accommodate our planned power levels in the future. Both antennas feature rugged construction to help them withstand the winters that we have here in New Hampshire, USA.

M2 70cm Beam

M2 Antenna Systems 70cm Yagi

It is important to pay careful attention to the feedline losses at these frequencies. This is especially important for us as we require 200’+ of feedline to get from our shack to the top of the tower/mast where the antennas are located. To ensure good performance, we set a target for the total losses in the feedlines to be no more than 1.5 dB. To meet this goal, we settled on the following configuration:

Using these components, both feedlines will have about 1.2 dB of loss end to end. We will place both beams on the 15′ mast above our upper SteppIR DB36 Yagi. We plan to place the 70cm Yagi at the top of the mast and the 2m Yagi between the DB36 and the 70cm Yagi in the middle of the mast. This configuration should minimize any interactions between the three antennas.

– Fred (AB1OC)

One thought on “VHF/UHF Antenna System Design

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s