AB1QB Enters The 2014 JARTS RTTY Contest – Our First Use Of N1MM+


AB1QB In 2014 JARTS Contest

AB1QB In 2014 JARTS Contest

One of Anita’s (AB1QB) favorite contests in the JARTS RTTY Contest. We decided to use the new N1MM+ Logger for the first time in this contest. There are many new features and improvements in N1MM+. A summary of N1MM+’s enhancements can be found here. We opted to do a completely clean installation of N1MM+ (rather than upgrading our existing N1MM Classic installation) to avoid any issues related to an upgrade scenario and to clean up any lingering issues with the software that we use with N1MM. We did save our N1MM Classic databases from previous contests and we imported those into N1MM+ after the upgrade. This process went very smoothly and we are finding N1MM+ much less difficult to configure and use. We also did clean installations of the MMTTY and 2Tone RTTY programs that we use along with N1MM+.

N1MM+ Setup On Dual Monitors

N1MM+ Setup On Dual Monitors (click to enlarge)

Having plenty of screen space really helps with our computer assisted style of operating. Each of our two operating positions has a PC with dual monitors and we made good use of the display space to organize all of the information that N1MM+ provides. The picture above shows the N1MM+ screen layout that Anita used for the contest (the following screen shots were taken after the contest so as not to interfere with Anita’s operations in 2014 JARTS RTTY).

N1MM+ Setup - Left Monitor

N1MM+ Setup – Left Monitor (click to enlarge)

Anita’s left monitor contains the N1MM+ and related windows that Anita used most during contest operations. You can see the MMTTY and 2Tone RTTY decoder windows in the right middle of the screen in operation on a RTTY signal that we are receiving. The windows to the left of the decoders are the N1MM+ Digital Interface windows which show the received text as it is decoded. It is common to use multiple decoders in a RTTY contest to maximize the chances of a good decode in marginal or noisy band conditions. MMTTY and 2Tone are set to use different decoding algorithms and each will work better in certain conditions than the other. The windows in the upper left and lower left of the screen provide a summary of available QSOs and multipliers based upon spotting cluster data and real-time contest information and performance statistics vs. goals that Anita programmed based upon her experience with this contest from last year. The small window at the bottom/center of the screen is the Rotator Control Window which provides an interface between the rest of the N1MM+ software and our rotatable antennas which are controlled via our microHAM Station Master Deluxe Antenna Controllers. We had no problems at all getting N1MM+ to work well with our microHAM system including the SO2R and WinKey capabilities of our microHAM MK2R+ and the antenna controller capabilities of our Station Master Deluxe Antenna Controllers.

N1MM+ Main Window

N1MM+ Main Entry Window

The picture above shows N1MM+’s Main Entry Window in detail. If you are familiar with N1MM Classic, you will immediately notice that most of the capabilities that are most commonly used to operate in a contest have been consolidated in this window. You can now change bands and see overall status of available contacts from this window. The fonts (including size), colors and skins are all customizable in all N1MM+ windows including this one.

Digital Interface Window (MMTTY)

Digital Interface Window (MMTTY)

The Digital Interface Window provides a new mode (wrap-round) which does not scroll the text up when the window is full. This is a big help to avoid “moving target” issues when one is trying to click on a decoded callsign or exchange information to get it into the logger. You can also hover over a callsign in this window with the mouse and it will be automatically entered in the N1MM+ Main Entry Window and checked.

Callsign Check Window

Callsign Check Window

The Callsign Check Window provides multiple options for determining if a callsign is valid or making corrections. The decoding algorithms have been improved and possible alternative characters for unmatched letters are highlighted in color. You can also now select multiple sources for information to base callsign lookups upon – your current log, the SuperCheck Partial file, Telnet spots received over the last 48 hours, and your current Call History database.

N1MM+ Setup - Right Monitor

N1MM+ Setup – Right Monitor (click to enlarge)

The picture above shows the N1MM+ Windows on Anita’s Right Monitor. On the left is the Bandmap Window which shows callsigns that have been spotted or worked on the current band. Clicking on a callsign or your CQ frequency indicator in this window will tune your radio to that place on the band and load the appropriate callsign into N1MM+’s Main Entry Window. In the upper right is the Telnet Cluster Window which shows and filters spots as they are received from your favorite Spotting Cluster server.

Log Window

Log Window

The picture above shows a closeup of the Log Window. This window’s layout is much cleaner and easier to read in N1MM+. it’s also possible to make corrections in log entries by just clicking on the desired field in a log entry and typing in a correct value. This is a real time saver when trying to make real-time corrections during a contest.

Multipliers Worked Window

Multipliers Window

There are a number of different Multiplier Window formats and each is useful depending up the multiplier structure of a given contest. The example above shows DXCC entities by band which is the most useful format for the JARTS RTTY Contest. N1MM+ allows one to include a color coded mix of multipliers that have been worked, spotted but not yet worked, or those that you expect to be on the air based upon your logs from the same contest during previous years (or perhaps an “announced operations” list that you have received prior to the contest). This new format provides a much more useful view of the operator’s progress on multipliers during a contest.

Grey Line Map

Grey Line Map

N1MM+ also provides a useful Grey Line Map Window which shows the current Grey Line location as well as recent spots. You can determine the callsign for a given spot “dot” by hovering over it with your mouse. A nice enhancement here would be to support click on this map to turn your rotatable antennas to that direction to enable working a group of spotted stations. It would also be nice if a line showing the current antenna direction could be displayed on this map.

Contest Statics

Contest Statics

There are also some nice enhancements in the Contest Statics reporting capabilities including a color coded graphical format. The format of the graph can be customized using a set of drop down boxes.

Score Summary Window

Score Summary Window

All of the enhancements in N1MM+ add up to a big improvement in usability of this popular contest logger. Shown above is Anita’s final claimed score for the 2014 JARTS RTTY Contest. Her score this year was about 200% higher than last year and no doubt the improved N1MM+ logger (along with Anita’s increasing experience as a contest operator) get some of the credit. Anita is using N1MM+ as part of the 2014 CQ WW SSB DX Contest this weekend. Look for an article here in the near future on Anita’s experiences with N1MM+ in that contest.

What’s your favorite Contest Logging Software? To help us understand our readers interests better, please complete the poll above.

– Fred (AB1OC)

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s