GoKit for Field Day and EMCOMM


Completed VHF/UHF GoKit

Completed VHF/UHF GoKit

We’ve been thinking about building a portable GoKit for VHF/UHF EMCOMM and Field Day Applications for a while now. The following is a list of our requirements for a GoKit –

  • 2m and 70cm operation with FM simplex and repeaters
  • APRS capability and tactical display for portable coordination
  • Digital messaging capability
  • Weather band monitoring capability
  • AC Power with flexible battery backup options

A plan to build our GoKit came together during our trip to the Dayton Hamvention this year.

Kenwood TM-D710GA At Dayton

Kenwood TM-D710GA At Dayton

The heart of any GoKit is the Transceiver. We’ve been using Kenwood equipment for our APRS iGate for some time now and we have had good results with it. Kenwood’s latest 50W transceiver with APRS is the TM-D710GA. This unit provides full support for APRS tactical applications and now includes a built-in GPS receiver making it ideal for our GoKit application.

AvMap GeoSat 6 APRS Tactical Display

AvMap GeoSat 6 APRS Tactical Display

We have been using the Kenwood TM-D710 along with an AvMap GeoSat APRS display in our APRS iGate setup and the combination works very well. The AvMap display lets one see the location of portable and mobile APRS stations on a map display. This arrangement is perfect for coordinating activities in an EMCOMM situation. The AvMap GeoSat 6 APRS display is no longer in production but I was able to locate a nearly new unit on eBay.

3 - iPortable Enclosure

We had a chance to look at the iPortable enclosure at Dayton and decided that their Pro 2 4U deep unit would be a good choice for our GoKit application. The iPortable enclosures are based on a portable rack mount case and include a DC power system, speaker and headphone hookups, a light, and provisions for a cooling fan.

Radio Shelf

Radio Shelf

With all the components in hand, we began the construction of our GoKit. Reliability is important in any portable system like this so we put some time into securely mounting all of the equipment and neatly arranging the cabling. First came the shelf which holds the Kenwood transceiver and a SignaLink USB sound card. A combination of drilling the shelf to secure gear with large cable ties and #8 stainless hardware was used here.

Coax Connector Cables

Coax Connector Cables

Our iPortable case was equipped with both SO-239 and N-connectors on the front panel to allow for antennas and feed lines equipped for either connector type. To make the change over between the connector types easy, we installed separate PL-259 jumper cables for each connector. One simply connects the appropriate jumper to the radio.

Display and Power Shelf

Display and Power Shelf

The power and AvMap display shelf was next. The AvMap display mount was dissembled and modified to accept a custom mounting bracket.

PWRgate Battery Interface and Charger

PWRgate Battery Interface and Charger

The iPortable enclosure was drilled to mount a West Mountain Radio PWRgate to handle backup battery charing and management. The PWRgate supports instantaneous switching between an AC power supply and a backup battery and can accommodate a wide range of battery types and sizes.

Backup Battery

Backup Battery

The PWRgate was configured to properly charge our 18AH AGM backup battery. Note the use of a fuse in series with the battery for safety reasons. We used a Powerwerx SPS-30DM adjustable power supply set to 14.5Vdc to operate our GoKit and to provide proper charging voltage for our AGM battery.

Diamond X-30 Antenna and Mast

Diamond X-30 Antenna and Mast

The last piece of the setup was the antenna. We wanted something that was portable, easy to set up and would provide good performance. We choose a Diamond X-30A 2m/70cm ground plane antenna and mounted it on an 12′ fiberglass push up mast. The feed line is made from 25′ of LMR-400UF coax. Several bungee cords are used to attach the mast to a fence post or other vertical structure.

10 - GoKit In Use

The picture above shows the completed GoKit in operation. We typically set one side of the Kenwood TM-D710GA to operate as an APRS transceiver and Digipeater and the other side to operate on a local repeater or simplex FM. The SignaLink sound card is used with a laptop computer running Fldigi and NBEMS for messaging applications. The iPortable case has a 13.8V lighter socket which connects to a power brick to power our laptop PC.

GoKit Packaged for Transport

GoKit Packaged for Transport

The GoKit is quite portable when closed. All of the equipment and cable connections are enclosed and protected by the case’s removable end caps. We’ve tested our GoKit during our club’s weekly repeater net and it worked great. The first real use of our new GoKit will be at Field Day this year. It will be located in our public information tent and will be used as a “talk-in” system.

Fred, AB1OC

 

4 thoughts on “GoKit for Field Day and EMCOMM

  1. Fred (and Anita),

    Really nice job, I do enjoy your blogs and look forward to them. This was a great project, and given me some ideas. Have you used this setup yet as a digipeater?

    73 es God Bless,

    Art / K0ACP

    • Hello Art,

      Thank you for your kind words about our Blog. I have the radio in our GoKit setup to run as a Digipeater whenever the radio is on an APRS frequency. This is useful for helping APRS capable HTs and mobiles nearby to get location updates to aprs.fi.

      Fred, AB1OC

    • Hello Mike,

      Thank you for reading our Blog. I got the Geosat 6 APRS in an ebay auction. It was like new. You might be able to find another one there.

      Fred, AB1OC

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s