GoKit for Field Day and EMCOMM


Completed VHF/UHF GoKit

Completed VHF/UHF GoKit

We’ve been thinking about building a portable GoKit for VHF/UHF EMCOMM and Field Day Applications for a while now. The following is a list of our requirements for a GoKit –

  • 2m and 70cm operation with FM simplex and repeaters
  • APRS capability and tactical display for portable coordination
  • Digital messaging capability
  • Weather band monitoring capability
  • AC Power with flexible battery backup options

A plan to build our GoKit came together during our trip to the Dayton Hamvention this year.

Kenwood TM-D710GA At Dayton

Kenwood TM-D710GA At Dayton

The heart of any GoKit is the Transceiver. We’ve been using Kenwood equipment for our APRS iGate for some time now and we have had good results with it. Kenwood’s latest 50W transceiver with APRS is the TM-D710GA. This unit provides full support for APRS tactical applications and now includes a built-in GPS receiver making it ideal for our GoKit application.

AvMap GeoSat 6 APRS Tactical Display

AvMap GeoSat 6 APRS Tactical Display

We have been using the Kenwood TM-D710 along with an AvMap GeoSat APRS display in our APRS iGate setup and the combination works very well. The AvMap display lets one see the location of portable and mobile APRS stations on a map display. This arrangement is perfect for coordinating activities in an EMCOMM situation. The AvMap GeoSat 6 APRS display is no longer in production but I was able to locate a nearly new unit on eBay.

3 - iPortable Enclosure

We had a chance to look at the iPortable enclosure at Dayton and decided that their Pro 2 4U deep unit would be a good choice for our GoKit application. The iPortable enclosures are based on a portable rack mount case and include a DC power system, speaker and headphone hookups, a light, and provisions for a cooling fan.

Radio Shelf

Radio Shelf

With all the components in hand, we began the construction of our GoKit. Reliability is important in any portable system like this so we put some time into securely mounting all of the equipment and neatly arranging the cabling. First came the shelf which holds the Kenwood transceiver and a SignaLink USB sound card. A combination of drilling the shelf to secure gear with large cable ties and #8 stainless hardware was used here.

Coax Connector Cables

Coax Connector Cables

Our iPortable case was equipped with both SO-239 and N-connectors on the front panel to allow for antennas and feed lines equipped for either connector type. To make the change over between the connector types easy, we installed separate PL-259 jumper cables for each connector. One simply connects the appropriate jumper to the radio.

Display and Power Shelf

Display and Power Shelf

The power and AvMap display shelf was next. The AvMap display mount was dissembled and modified to accept a custom mounting bracket.

PWRgate Battery Interface and Charger

PWRgate Battery Interface and Charger

The iPortable enclosure was drilled to mount a West Mountain Radio PWRgate to handle backup battery charing and management. The PWRgate supports instantaneous switching between an AC power supply and a backup battery and can accommodate a wide range of battery types and sizes.

Backup Battery

Backup Battery

The PWRgate was configured to properly charge our 18AH AGM backup battery. Note the use of a fuse in series with the battery for safety reasons. We used a Powerwerx SPS-30DM adjustable power supply set to 14.5Vdc to operate our GoKit and to provide proper charging voltage for our AGM battery.

Diamond X-30 Antenna and Mast

Diamond X-30 Antenna and Mast

The last piece of the setup was the antenna. We wanted something that was portable, easy to set up and would provide good performance. We choose a Diamond X-30A 2m/70cm ground plane antenna and mounted it on an 12′ fiberglass push up mast. The feed line is made from 25′ of LMR-400UF coax. Several bungee cords are used to attach the mast to a fence post or other vertical structure.

10 - GoKit In Use

The picture above shows the completed GoKit in operation. We typically set one side of the Kenwood TM-D710GA to operate as an APRS transceiver and Digipeater and the other side to operate on a local repeater or simplex FM. The SignaLink sound card is used with a laptop computer running Fldigi and NBEMS for messaging applications. The iPortable case has a 13.8V lighter socket which connects to a power brick to power our laptop PC.

GoKit Packaged for Transport

GoKit Packaged for Transport

The GoKit is quite portable when closed. All of the equipment and cable connections are enclosed and protected by the case’s removable end caps. We’ve tested our GoKit during our club’s weekly repeater net and it worked great. The first real use of our new GoKit will be at Field Day this year. It will be located in our public information tent and will be used as a “talk-in” system.

Fred, AB1OC

 

Quicker-Turnaround Digital Modes in Experimental Stage for WSJT-X Suite


WSJT Screen

WSJT Screen

WSJT-X developer Joe Taylor, K1JT, weighed in to express his appreciation to all who shared their ideas and experiences using JT9 and JT65 modes during recent multi-hop E-skip openings on 6 meters.

“We are very much aware that a mode with most of the excellent characteristics of JT65, but with faster turnaround time, would be a big winner in such situations,” Taylor commented on behalf of the WSJT-X development team. “We are experimenting with several such possibilities. Tentative goals include 15-second T/R sequences, sensitivity around S/N = –20 dB, occupied bandwidth less than that of JT65, and capability to decode as many as 10 or 20 signals in a 2-kHz bandwidth.”…

Source: Quicker-Turnaround Digital Modes in Experimental Stage for WSJT-X Suite

This is something to follow if you are interested in the JT modes for HF and VHF communications. Our experience is that a new JT variant that would trade S/N margin for a faster QSO segment speed would be just the ticket on many of the HF bands as well as 6m.

  • Fred, AB1OC

Nashua Area Radio Club’s 2017 Field Day Station Test


ARRL Field Day is the Nashua Area Radio Club’s largest and most popular activity each year. You can see more about our recent Field Day activities on our Field Day page and on our Blog.

Dave Merchant K1DLM, our Field Day chairman, is bringing some 21st Century radio and computer technology to our club’s Field Day setup this year. There are several aspects to this new component of our Field Day plans including –

  • Two Flex-6700 Software Define Radios running over a network  for our new Digital and enhanced GOTA Stations
  • An on-site WiFi Network to enable using the N1MM+ Logger in network mode for sharing of log information, station activity, real-time scores, and messages
  • A central Score Board and Club Information Computer in our public information tent
2017 Field Day Site - Upper Field Layout

2017 Field Day Site – Upper Field Layout

We will again be holding our 2017 Field Day operation at the Hollis-Brookline High School in Hollis, NH. We are planning on using the upper baseball field area as our main operating location. We have decided to add a third tower this year and locate it on a soccer practice field which is situated several hundred feet away from our main operating area. All of our antennas and equipment will lie within the required 1000′ circle but the third tower would situate those operating at that location away from the rest of our group. Dave’s solution to this problem was to set up a network and operate two Software Defined Radios (SDRs) at the lower site remotely from our location on the upper field.

Dave has enlisted club member Piece Fortin, K1FOP to be our IT Chairman for Field Day this year. Pierce has been instrumental, along with Dave, in the planning and testing of all of this new technology. Pierce and Dave have a great deal of networking and IT experience and knowledge and we could not have put together what is described here without them.

Dave K1DLM, Piece, Hamilton K1HMS, Mike Ryan K1WVO, Anita AB1QB, and myself have gotten together multiple times to set up and test all of this new technology. I wanted to share some more about the equipment and the associated testing (which has been staged in the kitchen at our QTH – thank you Anita!).

We began the testing process by setting up our 20m CW station.

20m CW Station Test

20m CW Station Test

This station uses an Elecraft K3S Transceiver, a K1EL WinKeyer and the N1MM+ Logger running on a Windows 10 Laptop PC. We used this station to get our basic N1MM+ setup including our Field Day CW keying macros right.

40m SSB Station Test

40m SSB Station Test

Next came our 40m SSB station. This setup uses an Icom IC-7300 Transceiver and allowed us to set up and test N1MM+ on the fly audio macro recording and playback. All three of our SSB stations will have on the fly recording and playback capability which will allow each of our SSB operators to record and use a custom set of audio macros.

Digital Station Test

Digital Station Test

Next came our Digital Station. This station uses one of the two remote Flex-6700 SDRs.

Remote Flex-6700 SDRs and Antenna Switch

Remote Flex-6700 SDRs and Antenna Switch

Dave, K1DLM put together a really nice package for the two Flex-6700 SDRs and associated equipment which will be located on the lower field. He used a rack system to mount the two SDRs, power supplies, a three-band Tri-plexor, a set of bandpass filters for 80m, 40m, 20m, 15m, and 10m and a 403A 8×2 networked antenna switch. This setup allows either of the two SDRs to share the tri-band yagi or the 40m and 80m Inverted-V antennas on the tower on the lower field and operate on any of the 5 available HF bands. Antenna and filter switching automatically track the frequencies of the two SDRs making the setup simple to use.

Digital Station Second Display - SmartSDR & More N1MM+

Digital Station Second Display – SmartSDR & More N1MM+

The Digital Station’s remote SDR will be operated using a SmartSDR client running on the Digital Station laptop PC. This station will have a second monitor to better accommodate all of the windows associated with it.

Digital Station Main Display - N1MM+

Digital Station Main Display – N1MM+

The main display associated with the Digital Station will run decoders for all PSK and RTTY modes. The ability to decode multiple PSK signals simultaneously and multiple RTTY decodes are available. The Digital station also acts as the N1MM+ master station in our Field Day setup for all of the other stations which use N1MM+.

Satellite Station Test

Satellite Station Test

Our Satellite Station 2.0 was also added to the test setup. It uses a MacBook Air laptop running MacDoppler to control the antenna rotators and the Icom IC-9100 Transceiver which are part of our Satellite Station. A Windows 10 Surface Pro computer is included which runs N1MM+ and provides logging and other network functionality for our Satellite Station.

GOTA Station Test

GOTA Station Test

We also tested our GOTA station which uses the second Flex-6700 SDR and a FlexRadio Maestro to provide a more conventional “buttons and knobs” interface for our GOTA operators to use. This station will also have a laptop PC running N1MM+ for logging.

Scoreboard Computer

Scoreboard Computer

We also build and tested a Scoreboard PC. This computer will be located in the Public Information tent at Field Day and will be connected to a large display. It will show our real-time score, QSOs being logged as they are made and other useful information about our Field Day operations. This computer will also continuously play videos from our Club Video Collection and will provide access to IP video cameras which monitor the tower and equipment on the lower field.

Pierce, K1FOP and Hamilton, K1HMS Testing CW Stations

Pierce, K1FOP and Hamilton, K1HMS Testing CW Stations

Our networked N1MM+ test bed contained at least one station of each type (CW, SSB, Digital, Satellite and GOTA) that will be part of our Field Day setup this year. The Station Masters for the additional CW and SSB stations came by to test their setups using the test bed.

Field Day Networking System

Field Day Networking System

The networking system which Dave and Pierce built is central to all of the technology described here. All of the gear is mounted in a single rack which will be located on the upper field during Field Day. The setup includes a Firewall/DHCP server, a commercial grade outdoor WiFi access point, a 4G LTE modem for Internet access, an Ethernet Switch, and a UPS power supply.

MoCA Data Link Cable

MoCA Data Link Cable

The upper and lower fields at our Field Day site are separated by several hundred feet. A thick line of trees between the two locations raised concerns about connecting the upper and lower sites using WiFi. Piece came up with a great solution to this problem – we will be using MoCA Data Modems and RG6 Quad Shield 75 ohm Coax Cable to provide a 10 Mbps data link between the two sites. We tested the MoCA link using a much longer run of coax cable then we will need to use at Field Day and confirmed full 10 Mbps throughput.

N1MM+ Talk Window

N1MM+ Talk Window

Our networked N1MM+ setup will allow any station in our setup to send messages to everyone who is operating at Field Day. We can use this capability for important communications like “lunch is ready!” or “I need help from Pierce (our IT chairman) on the 40m SSB station”, or “The 6m band is wide open!”.

Our GOTA and Digital stations will be located together in the same tent and will provide our Field Day 2017 visitors to see and use 21st century Amateur Radio technology to make contacts. We are expecting young people who participated in our club’s High-Altitude Balloon project and from other local schools where we have done Amateur Radio activities to attend. In additional to being a learning opportunity for all of us in the Nashua Area Radio Club, we hope that the state of the art technology that we are using will generate interest among our visitors. If you are local to the Nashua, NH USA area, come pay us a visit during 2017 Field Day. We’d enjoy providing a tour for you and your family along with a chance to Get On The Air. Hope to see you at Field Day!

Fred, AB1OC

The DX Alarm Clock – Part 1: Software


dx-alarm-clock-standalone

The DX Alarm Clock

I have been a Ham for 5 years and my favorite thing to do is chase DX. As a new Ham it was always a thrill to work a new DXCC, but now that I have over 280 DXCCs and over 1000 band points, it is a little more difficult to find a new one. Add to that the fact that I am trying to get a DXCC in 80m and 160m., which are usually open when I am asleep. I created the DX Alarm Clock as a way to get notified that there is something new on the air when I am not down in the shack.  This article will talk about how I developed the software for the DX Alarm Clock.  Part 2 will talk about the building the Raspberry Pi based Hardware and loading the OS.

The DX Alarm Clock is a Python software program running on a Raspberry Pi that gathers data online about my log and what is on the spotting network and uses that data to alert me when there is a “new one” on the air.

architecture

DX Alarm Clock Architecture

The ClubLog website provides a light DX Cluster website called DXLite, which has an XML Interface. The DX Alarm Clock uses this interface to get the current spots. The software uses the Developer API from ClubLog to get a JSON matrix of all DXCC entities by band indicating whether I have worked, confirmed or verified each band-entity. The software loops through all of the spots returned by DXLite and looks each DXCC up in the JSON ClubLog matrix. I also use the QRZ.com XML Interface to get additional information for each callsign that is spotted, like the state.

dxcc-config-screen

DXCC Configuration Screen

The DX Alarm Clock uses tkinter/ttk for the GUI.  I used the Notebook widget to create a multi-tab GUI.  There is a tab for configuring filters for DX Entity. The user can choose all New DXCCs, as well as specific bands and nodes to provide alerts for.

was-config-screen

WAS Configuration Screen

There is another tab for configuring filters for WAS. ClubLog has no log look up capability based on US State so the WAS filter lets you create a list of States and associated bands to provide alerts for.

notification-config-screen-with-blur

Notification Configuration Screen

The Notification tab allows configuration of what notifications the user would like to receive. The user can specify a separate email address for New DXCCs, New Band Points, and New US States. This allows alerts to be sent to email accounts or as SMS texts. You can also configure the sounds the the DX Alarm Clock itself makes to “wake you up” when that ATNO or new Band Point is spotted.

The DXAlarm clock wakes up every 5 minutes and gets the latest spots from the DXLite Cluster. It checks each spot against the ClubLog log and if there is a match based on the configure filters, it sounds the alert, and then speaks the alarm, giving you the Callsign, DXCC Entity, Band and Mode.   A simple text to speech package called flite (festival-lite) was used to implement the speech on the Raspberry Pi.

 

alert-screen

Alert Screen

It also puts a message with these details and the Frequency, UTC Date/Time, Spotter and Comment on the display.

iphone-notification

Text Notification to iPhone

Additionally it sends this information as an email to the configured email address, which results in a text or email.

 

iwatch

Apple Watch Alert

I can even get the alert on my Apple Watch.

spots-screen

Filtered Spots Display

Once all spots are processed, it keeps a running list of all spots that resulted in alerts on the main screen. Spots are aged out if they do not recur over time.

dx-alarm-clock

DX Alarm Clock Hardware

The DX Alarm Clock just alerted me that ZC4SB is on 20m – that’s an ATNO!  Got to go down to the shack and work him!    Stay tuned for Part 2 of this post on the DXAlarm Clock Raspberry Pi based hardware and on setting up the Raspberry Pi OS.

Anita, AB1QB

A New Project – Digital Fast Scan Amateur Television


Digital ATV CQ Call

Digital ATV CQ Call

Skip, K1NKR a local friend and VHF/UHF expert and I began talking about the idea of building a Fast Scan Amateur Television (ATV) System some time ago. Our early research and the antenna equipment which we had in place at our stations led us to plan our ATV project around the 70 cm band. The 70 cm band plan in the United States has allocations for Fast Scan ATV transmissions with a bandwidth of up to 6 MHz. Our research led us to Jim Andrews, KH6HTV’s excellent website where we discovered that it was possible to build a Digital ATV station using reasonably priced commercially available DVB-T format Modulators and Demodulators. Jim’s site has a wealth of great Applications Notes on Digital ATV and its a great place to start to learn about this technology. A combination of a DVB-T Modulator and Demodulator from Hi-Des was chosen as the heart of our Digital ATV System. We also worked with Jim to secure the needed Wideband Linear Power Amplifiers for the 70 cm band. We began receiving the equipment to build our Digital ATV Stations late last year. We’ve done quite a bit of testing on the air and some custom development work which has resulted in a pair of excellent performing Digital ATV stations. The picture above shows a Digital ATV “CQ” that I sent to initiate one of our early QSOs.

Digital ATV Transceiver

Digital ATV Transceiver

Here’s a picture of Skip receiving my “CQ” at his end. The picture quality produced by the equipment that we’re using and the DVB-T format is phenomenal. The Hi-Des Modulators which we are using have a large number of parameters which can be set to determine the format and bandwidth of the signals we generate. After some experimentation, we have settled on using QPSK modulation and a 6 MHz signal bandwidth. This combination delivers excellent picture quality with more that adequate motion performance. We see very few if any picture artifacts using our current format. We’ve also done some experimentation with QPSK and a 4 MHz signal bandwidth. I plan to share more on signal formats in a future article on our blog.

Digital ATV System User Interface

Digital ATV System User Interface

We are both using HD Digital Camcorders as our primary video signal sources and 1080p monitors to display our received signals. I opted to include an HDMI Video Switch from Gefen in my setup which also allows me to send video and graphics from a variety of different sources including my PC over the air. The monitor in the picture above on the right is a touch screen display which I use to control my ATV Transceiver system.

AB1OC Digital ATV Transceiver

AB1OC Digital ATV Transceiver

Early on, I decided to build a Transceiver like setup. I wanted to create a unit which was simple to use just like the HF Transceivers that are available today. Some of the key capabilities that I wanted to create included:

  • Real-time selection and switching between multiple HD video sources
  • Transmission of PC sourced Video and Graphics over the air
  • Preview and cueing of the next video transmission while receiving
  • Simultaneous display of both receive and pending transmit video
  • Built-in Transmit/Receive (T/R) switching with termination and protection of the Tx power stage
  • Sequencing of T/R stages including my tower mounted pre-amplifier system
  • Power and SWR monitoring with automatic trip on high SWR
  • An internal low-noise RF preamplifier to provide additional receive signal gain if needed
  • Touch screen graphical interface for configuration and operating the system
  • Recording of both sides of on-air video QSOs to an attached PC

To achieve these goals, I decided to build a Raspberry Pi 2 based Linux controller of my ATV Transceiver and to package all of the ATV components and video switching/conversion gear needed in a small rack mount enclosure. Many of the components in the system communicate with each other over an ethernet LAN and the transceiver is networked to computers and other devices via an external ethernet connection. More on the details of the Transceiver design to come in a future article.

Skip and I recently produced a short video to demonstrate how Fast Scan Digital ATV works and to show the quality that these systems are capable of producing. Our project is still a work in progress and I expect that we will continue to learn as we perform more tests and continue development of our systems. I plan to post additional articles here to share the details of our designs and learning from our on-air testing as we proceed.

– Fred (AB1OC)

Software Defined Radio/Remote Operating Gateway Part 3 – On The Air Remote!


Remote Operating Setup In Our Home Office

Remote Operating Setup In Our Home Office

In the previous articles is this series, we explained how we integrated a FlexRadio-6700 Software Defined Radio (SDR) into our station and how we used it as a platform to build the Remote Operating Gateway for our station. The project has turned out to be somewhat involved so we will be providing a series of articles to explain what we did:

With all of the hardware and software installed and the integration steps complete, we will  show some examples of using our remote operating setup on the air in this article. The first set of operating examples were made using the Remote Operating Client PC in our Home Office. This system is shown in the picture above.

Working The VK9WA DXpedition - Left Monitor

Working The VK9WA DXpedition – Left Monitor

We were able to make several contacts with the VK9WA DXpedition to Willis Island using our remote operating setup. The picture above provides a closer look at how we setup our Remote Client PC to work VK9WA (you can click on the pictures here to see a larger view). We just completed a CW contact with the VK9WA DXpedition on 40m and you can see that we have the QSO logged in DXLab’s DXKeeper. We used CW Skimmer to help determine where the operator was listening (more on this in a bit). We also used our Elecraft KPA500 Amplifier to make it a little easier to break through the pileup.

Working The VK9WA DXpedition - Right Monitor

Working The VK9WA DXpedition – Right Monitor

The picture above shows a better view of the second monitor on our Remote Client PC. SmartSDR is running to control our FlexRadio-6700 SDR and it is set up for split operation in CW mode on the 40m band. We also have DXLab’s DXView running and we used it to point our antennas to the short path heading for the VK9WA DXpedition. Finally, we used DXLab’s WinWarbler to remotely key the Winkeyer connected to our SDR in the shack to make the actual contact.

VK9WA DXpedition 30m Pileup Viewed From CW Skimmer

The video above shows the VK9WA DXpedition operating split in CW mode on the 30m band. Note how CW Skimmer allows us to see exactly where  the operator is listening (the VK9WA operator’s signal is the green bar at the bottom and the stations being worked can be seen sending a “599” near the top). You can see many of the folks trying to work the VK9WA DXpedition move near the last station that is worked in the pileup video.

VK9WA DXpedition 30m Pileup  Viewed From SmartSDR

The next video shows the VK9WA pileup in the SmartSDR application which controls the radio. This video provides a closer look at how SmartSDR is set up for split operation. Can you find the station that the VK9WA operator worked?  It is not quite in Slice Receiver B’s passband.

Laptop Remote Operating Client

Laptop Remote Operating Client

We also configured our Laptop PC to be a Remote Operating Client for our station. Our Bose SoundLink Bluetooth Headset is used to as both a wireless microphone and headphones with this system. Our Laptop Client PC can be used from any location on our property via the WiFi Wireless extension of our Home Network.

Window Arrangement For remote Operating From Laptop

Window Arrangement For remote Operating From Laptop

Since our Laptop PC has limited screen space, we created a configuration of overlapping windows to provide access to SmartSDR, key elements of the DXLab Suite and the applications which control/monitor our KPA500 Amplifier and Antennas. Each window is arranged so that a portion of it is always visible so that we can click on any required window to bring it forward when we need to use it.

Operating From Our Remote Laptop Client – A 20m SSB QSO

The video above shows a QSO that we made with AD0PY, David and his friend Daniel in Missouri, USA. We used the FlexRadio-6700 SDR/SmartSDR combination in VOX mode to make transmit keying simpler. At the beginning of the QSO, we  turned out antennas to point to AD0PY. Also note the operation of the KPA500 Amplifier when we transmit in the video. The QSO is logged in DXLab’s DXKeeper at the end of the contact in the usual way. Its fun to make casual contacts this way!

As you can see from this post, there is very little difference when we operate our station remotely or from our shack. This was an important goal that shaped the design of our Remote Operating Gateway and Client PC setup. Our next post will provide some details on how we setup the CW Skimmer and Digital Mode (RTTY, PSK and JT65/JT9) software to work on our Remote PC Clients.

– Fred (AB1OC)

Software Defined Radio/Remote Operating Gateway Part 2 – Client/Server Setup And Software


 

Remote Operating Gateway Client/Server Architecture

Remote Operating Gateway Client/Server Architecture

The next step in our Software Defined Radio/Remote Operating Project was to build a Remote Operating Gateway System in our shack and setup Client PCs to operate our station remotely. In a previous article, we explained how we integrated a FlexRadio 6700 Software Defined Radio (SDR) into our station to create a platform to build our remote operating project around. The project has turned out to be somewhat involved so we will be providing a series of articles to explain what we did:

In this article, we will explain the additional hardware and software that we used to enable remote operating as well as some additional equipment we added to our Client PCs that we use to operate our station remotely. The reader may want to refer to the picture above as you browse this article to better understand how the parts in our remote operating setup fit together. You can click on any of the pictures here on our blog to see a larger, easier to read version of them.

SmartSDR Software

SmartSDR Software Operating With A FlexRadio 6700 SDR

FlexRadio’s SmartSDR Software handles operating the SDR remotely. At the present state of maturity, SmartSDR can operate over a wired or wireless Ethernet LAN connection. At present, both SmartSDR and the FlexRadio-6xxx hardware must be on the same sub-network to function properly. FlexRadio has indicated that they plan to enable SmartSDR operation over wide-area broadband internet connections in the future. The design that we chose for our Remote Operating Gateway and Client PCs will allow operation of our entire station over the internet when SmartSDR is capable of fully supporting this. SmartSDR handles remoting of audio (microphone and speakers/headphones) as well as CW keying over our Home Network (more on this later) as well as control of the radio. With these key functions taken care of, we need to also remote the following functions of our station to fully support remote operation:

Remote control of equipment power is particularly important to provide a means to reset/restart equipment remotely as well as a means to shut down the Transmitter remotely.

Remote GW Control Stack - Antenna, Power and Monitoring

Remote Gateway Control Stack – Antenna, Power and Monitoring

Remote control of power for the components in our Remote Operating Setup is handled by a RIGRunner 4005i power control device. This unit provides remote power control over a network for up to 5 separate groups of devices. It also provides voltage/current monitoring and solid state over-current protection as well.

RIGRunner Remote Power Control Setup

RIGRunner Remote Power Control Setup

The figure above shows how we setup our RIGRunner 4005i. The device is controlled over our Home Network via a standard Web Browser. As you can see from the picture above, this devices lets us remotely control power to all of the devices in our Remote Operating Setup.

Remote Control Relay Unit

Remote Control Relay Unit

The FlexRadio-6700 SDR requires some additional power control handling. Simply removing and applying power to the FlexRadio-6700 SDR will reset the radio and leave it in a power off state. The FlexRadio-6700 SDR does have a remote power control input which can be controlled via a relay closure. We used a microbit Webswitch 1216H device to provide a remotely controlled relay closure to control the power off/on for the FlexRadio-6700 SDR.

Flex-6700 On/Off Control Via microbit Webswitch

Flex-6700 On/Off Control Via microbit Webswitch

The microbit Webswitch 1216H relay unit is also controlled over our Home Network via a standard Web Browser.

SmartSDR Setup - Tx Keying, Tx Interlock and Remote Power Control

SmartSDR Setup – Remote On/Off Control

The FlexRadio-6700 SDR is configured for remote on/off operation via the Radio Setup dialog in SmartSDR as shown above. A cable is run between the remote power on/off port on the FlexRadio-6700 SDR and the microbit Webswitch 1216H relay unit to complete this part of our Remote Control System.

Beams On Our Tower

Beams On Our Tower

It is also important to have full remote control of our Antennas and Rotators to effectively use our station from outside our shack. Control of our Rotators is accomplished by software which remotes serial COM ports over our Home Network.

Network Serial Port Kit

Network Serial Port Kit

We used the Fabulatech’s Network Serial Port Kit package to remote the serial COM ports used to control the microHAM Station Master Deluxe Antenna Controller, the associated antenna Rotators and the WinKeyer associated with our FlexRadio-6700 SDR. This software runs on both the local Server computer in our shack which hosts the Remote Operating Setup and any Client PCs which are used to operate our station remotely.

microHAM Station Master Deluxe Antenna Control via Teamviewer and Development App

microHAM Station Master Deluxe Development Application Via TeamViewer

There is not currently a production software tool to enable remote control of the microHAM Station Master Deluxe Antenna Controllers which we use in our shack. I am planning to develop our own application to do this in the future. The folks at microHAM have been so kind to provide me with the interface specifications needed to control the Station Master Deluxe Antenna Controller remotely along with a Developer Only test application (shown above) which can be used to understand the microHAM Device Protocol. In the interim, I have been using the microHAM Developer Only application along with the TeamViewer Remote Control Software to control antenna selection remotely and to monitor the position of the current selected rotators.

Shack Remote Operating Gateway Server PC Applications

Shack Remote Operating Gateway Server PC Applications

The remaining software required for remote control of our station is provided by the Elecraft applications which control the KPA500 Amplifier, KAT500 Auto-Tuner, and W2 Wattmeter which are used in our Remote Operating Gateway setup. All of these applications along with the microHAM Developer Only Application for Station Master Deluxe control and the DDUtil Program which interworks the FlexRadio-6700 SDR CAT interface with the Station Master Deluxe (see the previous article in this series) are shown above running on our Shack Server PC. This PC is on at all times and is protected by a Uninterruptible Power System (UPS) to ensure that it runs trouble-free.

Remote Operating PC Client Software Applications

Remote Operating PC Client Software Applications

In addition to FlexRadio SmartSDR, each of the Server Side PC applications has a corresponding Client Side application which is used on the Remote Operating Client PC. Shown above are the three Elecraft Client applications for Amplifier, Auto-Tuner and Wattmeter control and monitoring. The client side Network Serial Port Kit application which replicates the WinKeyer, microHAM Station Master Deluxe and Rotator Control COM ports is also shown.

Heil Microphone And USBQ Adapter

Heil Microphone And USBQ Adapter

The PC in our home office will be a primary remote operating location for our station. Audio quality is important to us and we wanted to ensure that the quality of our audio was just as good operating remotely as it is when we operate from our Shack. To accomplish this, we installed a Heil PR781 Microphone, PL2T Boom and USBQ Adapter/Pre-Amp on our home office PC. The Heil USBQ is a USB sound card and microphone pre-amplifier which connects directly to the PR781 microphone to create a high-quality phone audio source which can be used with the FlexRadio-6700 SDR when operating remotely.

Bose SoundLink BluTooth Headset

Bose SoundLink Bluetooth Headset

The speakers our my home office PC are quite good but there are often times when a set of headphones are needed to hear weak signals. We choose a quality Bluetooth Headset from Bose for this purpose. The Bose SoundLink Headset is light weight, is wireless, has excellent fidelity and includes a very good microphone which can be used as an alternative to the Heil PR781. This headset is also very useful when operating from our Laptop Client PC from noisy locations outside our home (more on this in a future article).

SmartSDR DAX Control Panel

SmartSDR DAX Control Panel

The last pieces of the remote operating system are provided two applications which are part of the SmartSDR software package. The SmartSDR’s DAX Control panel provides remote audio connections for Digital Mode Software and the CW Skimmer decoder. Audio is provided by software “audio cables” for each of the FlexRadio SDR’s Slice Receivers and the active Tx Slice. SmartSDR DAX Audio IQ interfaces are also provided for each of the SDR’s Panadapters which permits software like CW Skimmer to monitor and decode a wide range of frequencies simultaneously.

SmartSDR CAT

SmartSDR CAT

The SmartSDR CAT application provides CAT interfaces on both our Client and Server PCs for applications which need to control or monitor what the FlexRadio-6700 SDR is doing. Many loggers and other applications are beginning to implement direct IP interfaces to the CAT channel of the FlexRadio 6xxx Series SDRs. This approach simplifies interworking between the software and the radio and appears to be more reliable than virtual COM-based CAT interfaces.

Client PC Running SmartSDR And The DXLab Suite

Client PC Running SmartSDR And The DXLab Suite (Home Office)

With all of the above elements in place, any client PC that can access our Home Network can be used to operate our station. The picture above shows SmartSDR and the DXLab Suite running on our Home Office PC. The remote emulations of the Rotator, CAT and Winkeyer interfaces are such that DXLab’s applications can fully operate our station as if they we running in our shack.

Client PC Running SmartSDR And The DXLab Suite - Right Monitor

Client PC Running SmartSDR And The DXLab Suite – Right Monitor

The picture above shows a closer view of my Home Office PC’s Right monitor (click on the picture to enlarge it). SmartSDR is running the upper left corner and I am listening to folks operate in the 2015 CQ WW DX CW Contest. The SDR is set on the 20m band and I have the CW Keyer which is built into SmartSDR running. The DAX Control Panel is running on the lower right corner of the screen and its setup for use with the CW Skimmer decoder. DXLab’s WinWarbler is running (top-center) which enables me to use the WinKeyer in the shack to send CW as well via the remote COM port associated with the WinKeyer. Below WinWarbler is the microHAM Developer Only application (accessed remotely via a TeamViewer connection to the Shack Server PC) which shows that I have both of our SteppIR DB36 Yagis are selected as a stack and pointed towards Europe. DXLab’s DXView Rotator Control application is running in the center-bottom of the screen so that we can turn our Yagis towards other parts of the world (rotators are controlled via another remote COM port). Finally, the client KPA500 Amplifier control application is running in the lower left corner to control the amplifier and to monitor the power out and SWR seen by the amplifier being used to operate remotely.

Client PC Running SmartSDR And The DXLab Suite - Left Monitor

Client PC Running SmartSDR And The DXLab Suite – Left Monitor

The picture above shows a closer view of the left monitor. DXLab’s logger, DXKeeper is running at the top/center of the screen. Below it is DXLab’s SpotCollector application which is monitoring spots of the many CW stations around the world that are operating in the contest. DXLab’s Commander applications is running in the lower-right corner of the screen and is monitoring the FlexRadio-6700 SDR’s slice Tx/Rx frequency as well as providing a control interface of the SDR to the rest of the DXLab Suite (via SmartSDR CAT). The Elecraft W2 Wattmeter client control application is just above commander. The W2 Wattmeter client application provides higher resolution power out and SWR monitoring for the remote setup. Bottom-center is DXLab’s Launcher application and just to the left of that is the KAT500 Auto-Tuner Client Control application. Finally, CW Skimmer is running on the left side of the screen.

CW Skimmer Operating Remotely

CW Skimmer Operating Remotely

As you can see, CW Skimmer is decoding a wide range of frequencies in the 20m CW sub-band. It is receiving its audio in IQ format via the SmartSDR DAX application. It is great fun to operate CW this way and I am finding myself making a lot more CW contacts now that I have the remote operating setup in my office.

The next post will provide some samples of remote operation in the form of videos. I will also share some information on setting up a Remote Operating Client on a laptop where screen space is more limited. We plan to take a trip outside our house to operate our station over the Internet and we plan to share information on how that is done. We will also provide future articles on how to setup CW Skimmer and Digital Modes (RTTY, PSK and JT65/JT9) on the HF Bands and use them remotely.

For now, we are really enjoying the freedom to operate our station remotely!

– Fred (AB1OC)